Transline

These are not sold on the solo red retail cards. These are assembled in-house to allow smaller quantities than 250 to be purchased. X34 is a high relief capsule to fit thicker coins. Example is 1 oz...

These are not sold on the solo red retail cards. These are assembled in-house to allow smaller quantities than 250 to be purchased. X34 is a high relief capsule to fit thicker coins. Example is 1 oz silver palladium coin, 34mm diameter and 2.5mm thickness

38 mm Air tite Holder with black ring. This capsule is for 1.5 oz. Canadian Wildlife medallion. Also holds the 2 oz. Queens Beasts silver coins. It is high relief for coins that exceed 3.9mm up to a...

38 mm Air tite Holder with black ring. This capsule is for 1.5 oz. Canadian Wildlife medallion. Also holds the 2 oz. Queens Beasts silver coins. It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

38 mm Air tite Holder with black ring. This capsule is for 1.5 oz. Canadian Wildlife medallion. Also holds the 2 oz. Queens Beasts silver coins. It is high relief for coins that exceed 3.9mm up to a...

38 mm Air tite Holder with black ring. This capsule is for 1.5 oz. Canadian Wildlife medallion. Also holds the 2 oz. Queens Beasts silver coins. It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

39 mm Air tite Holder with black ring. This capsule is for Scottsdale Stacker (2 oz only) and Biblical Series Medallions . It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

39 mm Air tite Holder with black ring. This capsule is for Scottsdale Stacker (2 oz only) and Biblical Series Medallions . It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

39 mm Air tite Holder with black ring. This capsule is for Scottsdale Stacker (2 oz only) and Biblical Series Medallions . It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

39 mm Air tite Holder with black ring. This capsule is for Scottsdale Stacker (2 oz only) and Biblical Series Medallions . It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

40 mm Air tite Holder with black ring. It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

40 mm Air tite Holder with black ring. It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

40 mm Air tite Holder with black ring. It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

40 mm Air tite Holder with black ring. It is high relief for coins that exceed 3.9mm up to a 7.2mm thickness.

For challenge coins, 3.96mm depth

For challenge coins, 3.96mm depth

The Air-Tite brand X1.75 holder is designed to hold 1.75" Medallion, Military Challenge Coins with depth not exceeding 3.96mm. Each pack contains one acrylic holder with base and lid in clam shell...

The Air-Tite brand X1.75 holder is designed to hold 1.75" Medallion, Military Challenge Coins with depth not exceeding 3.96mm. Each pack contains one acrylic holder with base and lid in clam shell on red peg-hole card. Each pack contains one acrylic holder with base and lid separated vertically in clam shell on red peg-hole card.

Air-Tite X3 Direct Fit Coin Holder for 2oz. Rounds (47.12mm).

Air-Tite X3 Direct Fit Coin Holder for 2oz. Rounds (47.12mm).

The Air-Tite brand X3 holder is designed to hold wide diameter 2 ounce Silver Rounds with depth not to exceed 3.96mm. This holder and the X6 holder are both fitted to 2 oz rounds, but the X3 has a...

The Air-Tite brand X3 holder is designed to hold wide diameter 2 ounce Silver Rounds with depth not to exceed 3.96mm. This holder and the X6 holder are both fitted to 2 oz rounds, but the X3 has a slightly smaller diameter at 47.12mm, or 1.855 inches. Each pack contains one acrylic holder with base and lid separated vertically in clam shell on red peg-hole card.

Casino $10 Silver Strike

Casino $10 Silver Strike